DIN 1 - Taper Pins - Boltport Fasteners

d1 h10	0.6	0.8	1	1.5	2	(2.5)	3	4	5	6
c max.	0.1	0.12	0.15	0.23	0.3	0.4	0.45	0.6	0.75	0.9
r ≈	0.6	0.8	1	1.5	2	(2.5)	3	4	5	6
l js15	Weight (7.85 kg/dm³) kg per 1000 pieces ≈
4	0.01
6	0.017	0.028
8	0.023	0.030	0.058
10	0.031	0.05	0.075	0.16
12		0.063	0.095	0.206	0.341	0.526
14		0.077	0.114	0.24	0.404	0.62	0.88
16			0.135	0.295	0.468	0.712	1.02	1.78
18			0.157	0.339	0.534	0.811	1.15	2
20				0.384	0.605	0.914	1.29	2.23	3.47
(22)
24				0.485	0.752	1.13	1.58	2.72	4.18	6.02
(26)
28					0.909	1.35	1.88	3.22	4.93	7.17
(30)
32					1.08	1.59	2.2	3.73	5.7	8.35
36					1.26	1.84	2.55	4.28	6.51	9.5
40						2.1	2.88	4.84	7.3	10.3
45							3.35	5.56	8.35	11.7
50							3.83	6.31	9.45	13.4
55								7.12	10.6	14.7
60								7.94	11.8	16.3
70									14.2	19.7
80										24.3
90										28.4
1) if the letter indicating the desgin (i.e. ground or turned) is missing in the documentation dealing with the designation, then desgin A (ground) applies.

d1 h10	8	10	12	14	16	20	25	30	40	50
c max.	1.2	1.5	1.8	2	2.5	3	4	4.5	6	7.5
r ≈	8	10	12	14	16	20	25	30	40	50
l js15	Weight (7.85 kg/dm³) kg per 1000 pieces ≈
28	12.3
(30)	13.1
32	14	21.9
36	16	24.8	35.4	47.6
40	17.8	27.6	31.6	52.4	69.8
45	20.2	31.2	44.6	60	78.6
50	22.7	34.9	49.8	66.6	87.4	137
55	25.3	38.5	53.2	73.8	96.4	150	235
60	27.8	42.5	60.2	81.2	105	164	257	369
65	33.2	50.4	71.8	95.9	123	192	290	439	770
70	38.8	58.5	83	110	143	220	342	492	876	1390
80	44.5	67	94.5	126	162	250	386	581	984	1550
100	50.5	75.7	106	141	181	280	430	616	1110	1710
110	57	84.7	118	157	202	310	475	680	1210	1880
120	63.5	94	130	173	222	340	521	742	1320	2050
130		104	143	188	244	370	567	808	1430	2210
140		114	157	208	265	403	615	874	1540	2400
150			170	225	287	436	664	957	1655	2570
165			192	252	321	484	736	1040	1820	2830
180					357	536	812	1150	2090	3090
200					406	606	914	1290	2240	3450
230					657	715	1080	1500	2600	4000
260							1240	1730	2970	4550
The commercial grade sizes are identified by the indication of their weight. The listed weights are a rough guide only Sizes featured in brackets and intermediate lengths must be avoided as far as possible.

d₁		0.6	0.8	1	1.5		2	(2.5)	3	4	5
Range of diameter d₂	above	1	2	3	4	5	6	--	8	11	17
Range of diameter d₂	up to	2	3	4	5	6	8	--	11	17	23
w	min.	2	2.5	3	3.5	4	4.5	--	5	6	7.5

d₁		6	8		10		12	16	20
Range of diameter d₂	above	23	30	38	45	50	75	110	160
Range of diameter d₂	up to	30	38	45	50	75	110	160	1)
w	min.	9	10	11	11.5	13	15	18
1) The correlation of taper pins of diameter d₁ = 20 mm and above and with shaft diameter above 1600 mm is left to the user's discretion.

DIN 1 - Taper Pins